NET-EL-ESR-9752
EnGenius 11n router 2T2R 300mbps
- 11N Broadband Router
- 6 times faster speeds and 3 times extended coverage than 802.11g devices
- WPS function allows you to connect to your wireless hardware with just one push of a button
- Built-in 4-port full-duplex 10/100 Fast Switch
NET-EL-ESR-9752
(Mfr part code: ESR-9752)
Overview
The EnGenius ESR-9752 is a 2T2R Wireless Single chip 11N Broadband Router that delivers up to 6 times faster speeds and 3 times extended coverage than 802.11g devices. The ESR-9752 supports your home network with superior throughput and performance and unparalleled wireless range. The WPS function allows you to connect to your wireless hardware with just one push of a button. There is a built-in 4-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devices together. EnGenius covers this product with a 2 year manufacturer’s warranty.
Specifications
| Download Specification Datasheet | |
|---|---|
| Hardware Specifications | |
| Physical Interface | WAN: One 10/100 Fast Ethernet RJ-45 LAN: Four 10/100 Fast Ethernet RJ-45 Rest button Power Jack WPS (WiFi Protected Setup) |
| Power Requirements | Power Supply: 200 to 240 VAC ± 10％ (ETSI) 100 to 120 VDC ± 10％ (FCC) Device: 12V/1A |
| RF Specification | |
| Frequency Band | 2.400～2.484 GHz |
| Modulation Technology | OFDM: BPSK, QPSK, 16-QAM, 64-QAM DBPSK, DQPSK, CCK |
| Operating Channels | 11 for North America, 14 for Japan, 13 for Europe |
| Wireless | Wireless Mode – 11b/ 11g /11n (See datasheet for further information) |
| Receive Sensitivity (Typical) | - IEEE802.11n(2RX) MCS0/8 @ -91dBm MCS7/15@ -74dBm - IEEE802.11g (2RX) 6Mbps@ -92dBm 54Mbps@ -75dBm - IEEE802.11b (1RX) 1Mbps@ -93dBm 11Mbps@ -91dBm |
| Available transmit power | _ IEEE802.11N MCS 0~15@ >16dBm - IEEE802.11g 6~54 Mbps@ 16dBm - IEEE802.11b 1, 11Mbps@ 19dBm |
| Antenna *2 | Peak Gain = 2 dBi |
| Router and Gateway | |
| Topology | Infrastructure |
| Operation Mode | AP/Router |
| LAN | DHCP Server Static Routing Table UPNP |
| WAN | PPTP PPPoE Static IP DHCP Client Clone MAC |
| Router | NAT/ NAPT Static Routing Dynamic Route Virtual server mapping IP address mapping Port Forwarding Port Triggering Special application ALG(Application Layer Gateway) support (RTP/RTSP, AOL, FTP, ICMP, WMP/MMS, NetMeeting, SIP) DNS Relay DDNS Time Zone(NTP client) |
| Firewall | Blocking Ping DoS(Blocking Ping, Port scan, Sync Flood) MAC / IP Filtering ICMP Blocking SPI (Stateful Packet Inspection) DMZ (Demilitarized Zone) Host Policy Based Parental Controls - Port Range / Service Filtering - Internet Domain Restriction - Dynamic URL Filtering (OEM subscription service) |
| VPN | VPN pass-through (PPTP, L2TP, IPSEC) |
| Wireless | Power saving(Green technology) 64/128 bit WEP Encryption WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.1x Authenticator Hide SSID in beacons Wi-Fi Protection Setup (WPS) WDS ACL control Best channel selection Speed/Bandwidth monitor |
| QoS | WMM Application base - Priority Queue - Bandwidth Allocation |
| Management | |
| Configuration | Web-based configuration (HTTP) |
| Firmware Upgrade | Via webpage upgrade Auto recovery once firmware upgrade fail |
| Administrator Setting |
Administrator password change |
| Reset Setting | Reboot Reset to Factory Default |
| System monitoring | Speed and Bandwidth monitoring |
| Scheduling | Enable Firewall Enable power saving |
| Easy access | User can type model name and access the main page |
| Install wizard | Guide user to set-up Router smoothly |
