| Standard |
IEEE 802.3
10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3af
IEEE 802.1Q
(VLAN Tagging)
IEEE 802.3x (Full-duplex flow control and Back
pressue)
IEEE 802.1P Based QoS |
| Ports |
1. 8 x
10/100Mbps Auto-negotiation, Auto-MDIX PoE ports (port 1 ~ port
4)
2. 16 x 10/100Mbps Auto-negotiation, Auto-MDIX Fast Ethernet
ports (port 5 ~ port 8) |
| Network
Media |
1.
10BASE-T Ethernet: UTP Cat. 3,4,5, Unshielded Twisted Pair (UTP)
Cable
2. 100BASE-TX Fast Ethernet: UTP Cat. 5, Unshielded Twisted
Pair (UTP) Cable
3. PoE port: UTP Cat. 5, Unshielded Twisted Pair
(UTP) Cable |
| Network Data Transfer
Rate |
1.
Ethernet : 10Mbps (Half-duplex) , 20Mbps (Full-duplex)
2. Fast
Ethernet : 100Mbps (Half-duplex) , 200Mbps
(Full-duplex) |
| Management |
Web-based
configuration / Web Management Utility Setting
Port-setting for
Speed/Disable, Flow control |
| VLAN |
Port based
VLAN
IEEE802.1Q Tag VLAN |
| QOS
policy |
Support 3
priority levels ID for two priority queue and allow to assign High
and Low priority on each port |
| Bandwidth
Control |
Support
each port bandwidth control. Per level 100Kbps |
| PoE (Power over
Ethernet) |
1. Up to
15.4W per port
2. PD classification identify
3. PoE Over
Current Protection
4. PoE Circuit sorting protection
5. PoE
Power on RJ-45 pin 3,6 for Power+ and pin 1,2 for
Power |
| Environment |
Temperature
& Humidity :
Operating: 0 ~ 40 oC, Operating: 10% ~ 90%
RH
Storage: -10 ~ 70 oC, Storage: 5% ~ 90% RH |
| LED
Indicators |
Per Unit :
Power, System ( 2 LEDs )
Per port : TX: Link/Activity, Speed ( 2
LEDs )
PoE : PoE Status (port 1 ~ port 8) |
| Power |
100 -
240VAC 50/60Hz, Internal Universal Switching Power |
| Power
consumption |
9 watts.
(max. no PD device connected)
130 watts (max. with 8 x 15.4w PoE
Device connected) |
| Dimensions |
440(W) x
140(H) x 44(D) mm
19inch Rack-Mount Size |
| Safety |
cUL (UL
60950)
CB(IEC 60950) |